Pro Series 42 in. Base Cabinet

The Pro 3.0 Locker Cabinet is 36"W x 24"D x 80" H. The adjustable legs range from 3.25" to 4.75", bringing the height of this cabinet to 83.25" to 84.75".

If caster are installed to the base cabinet this would prevent the cabinet from fitting underneath the work top. All base cabinets per counter top will need to move and be installed as one piece. You are able to connect the base cabinets to each other, and then attach the work top, so that the cabinets move as one unit.

Yes, all of the locks are keyed the same.

The weight would be the same if installed correctly, please note the brackets that come with the cabinets are meant for easy installation, the cabinets must be secured to the wall using the supplied hardware for maximum strength.

The hardware that is provided with order is only for studded walls, please visit your local hardware store for the proper masonry mounting hardware. The instruction manual includes the details for this type of installation

Yes, you are able to purchase slat wall brackets that are compatible with most 3 inch on-center sized slat walls. You will need 2x 24" Slat wall bracket for mounting each Pro 3.0 36" Locker cabinet.

The Pro 3.0 series has a Limited Lifetime manufacturer's warranty

The Pro 3.0 series has 18 gauge steel frames and 19 gauge double-walled door fronts.

The casters are not designed to be installed on the locker units. This could also cause a tipping hazard and is not recommended.

Yes, the Locker shelves are adjustable in 1" increments

Yes, you are able to purchase additional shelves through the website

The 36" Locker includes 4 adjustable shelves

The adjustable leg ranges from 3.25 to 4.75 inches and so it has the capability adjust within 1.5 inches when levelling your cabinets

Yes, the locker cabinets do include a removable/adjustable closet hanging rod

No, we currently do not offer additional closet hanging rods as a separate purchase

Yes the faucet aerator and be removed to reveal threads that allow a faucet hose adapter to thread in. Then a garden hose can be threaded to the hose adapter.

Yes, to ensure drain and sink are free of any leakage we recommend using plumbers putty to seal the drain to the sink.

Any standard faucet that fir inside a 38mm faucet hole will work.

Yes, We recommend dogs small to medium size who can comfortably fit within the 37in x 14in x 9in sink space. The strainer in our drain can catch clumps of fur so that your pipelines remain clear.

Yes, the sink cabinet features a cut out in the back panel that allow water intake angle valves into the cabinet.

Yes wall brackets are provided to secure to wall studs.

The cabinet and sink are fully assembled for the 42in sink. The 28in sink requires sink assembly. All faucets and drain parts require assembly.

The sink is made of stainless steel which is rust resistant, but we recommend regular maintenance of sink surfaces.

37in x 14in x 9in

Yes, the Sink is cUPC certified that is in compliance with the Uniform Plumbing codes of both the US and Canada